Tonight's Lunchbox

網路上有很多文章在講解如何將SDL整合到Android的平台上，我自己也試著動手做看看，順便將一些步驟及心得整理起來。

以下是這次我所用到的開發環境。

- Cygwin
- Android NDK：android-ndk-r4b-windows
- SDL：1.2.14


《Step 1》
將SDL中的Makefile.minimal修改如下 (紅體字) ：

# Makefile to build the SDL library

PREBUILT = /android-ndk-r4b/build/prebuilt/windows/arm-eabi-4.4.0

INCLUDE = -I./include -I/android-ndk-r4b/build/platforms/android-8/arch-arm/usr/include
CFLAGS  = -g -O2 $(INCLUDE)
CC  = $(PREBUILT)/bin/arm-eabi-gcc
AR  = $(PREBUILT)/bin/arm-eabi-ar
RANLIB  = $(PREBUILT)/bin/arm-eabi-ranlib

CONFIG_H = include/SDL_config.h
TARGET  = libSDL.a
SOURCES = \
    src/*.c \
    src/audio/*.c \
    src/cdrom/*.c \
    src/cpuinfo/*.c \
    src/events/*.c \
    src/file/*.c \
    src/joystick/*.c \
    src/stdlib/*.c \
    src/thread/*.c \
    src/timer/*.c \
    src/video/*.c \
    src/audio/dsp/*.c \
    src/audio/dma/*.c \
    src/video/fbcon/*.c \
    src/joystick/dummy/*.c \
    src/cdrom/dummy/*.c \
    src/thread/generic/*.c \
    src/timer/unix/*.c \
    src/loadso/dummy/*.c \

OBJECTS = $(shell echo $(SOURCES) | sed -e 's,\.c,\.o,g')

all: $(TARGET)

$(TARGET): $(CONFIG_H) $(OBJECTS)
    $(AR) crv $@ $^
    $(RANLIB) $@

$(CONFIG_H):
    cp $(CONFIG_H).default $(CONFIG_H)

clean:
  rm -f $(TARGET) $(OBJECTS)


《Step 2》
修改 ./include/SDL_config_minimal.h (紅體字) ：

#ifndef _SDL_config_minimal_h
#define _SDL_config_minimal_h

#include "SDL_platform.h"

/* This is the minimal configuration that can be used to build SDL */

#include <stdarg.h>

typedef signed char int8_t;
typedef unsigned char uint8_t;
typedef signed short int16_t;
typedef unsigned short uint16_t;
typedef signed int int32_t;
typedef unsigned int uint32_t;
typedef unsigned int size_t;
typedef unsigned long uintptr_t;

#define SDL_AUDIO_DRIVER_OSS    1

#define SDL_CDROM_DISABLED  1

#define SDL_JOYSTICK_DISABLED   1

#define SDL_LOADSO_DISABLED 1

#define SDL_THREADS_DISABLED    1

#define SDL_TIMER_UNIX  1

#define SDL_VIDEO_DRIVER_FBCON  1

#define HAVE_STDIO_H 1

#endif /* _SDL_config_minimal_h */


《Step 3》
由於Android的framebuffer設備是 /dev/graphics/fb0 (Linux是 /dev/fb0)，所以我們需要修改 ./src/video/fbcon/SDL_fbvideo.c。將檔案中所有的/dev/fb0全都置換成/dev/graphics/fb0


《Step 4》
開始編譯 libSDL.a，在 Cygwin下進入SDL的根目錄，輸入

make -f Makefile.minimal


《Step 4.1》
make的過程中會遇到一些compile error，我們一步步來解決它們。首先，compiler會告訴我們某些變數已經 (在SDL_config_minimal.h) 重覆定義了：

/android-ndk-r4b/build/platforms/android-8/arch-arm/usr/include/stdint.h:53: error: redefinition of typedef 'int8_t'
./include/SDL_config_minimal.h:32: note: previous declaration of 'int8_t' was here

解決的辦法是將SDL_config_minimal.h中重覆定義的部分mark起來 (紅體字)：

//typedef signed char int8_t;
//typedef unsigned char uint8_t;
//typedef signed short int16_t;
//typedef unsigned short uint16_t;
//typedef signed int int32_t;
//typedef unsigned int uint32_t;
//typedef unsigned int size_t;
//typedef unsigned long uintptr_t;

《Step 4.2》
接著，compiler認為SDL_dummy_enum的size不合法：

./include/SDL_stdinc.h:151: error: size of array 'SDL_dummy_enum' is negative

在這邊，我將SDL_stdinc.h的151行mark起來 (紅體字)：

//SDL_COMPILE_TIME_ASSERT(enum, sizeof(SDL_DUMMY_ENUM) == sizeof(int));

《Step 4.3》
最後會遇到的error是找不到soundcard.h：

src/audio/dsp/SDL_dspaudio.c:44:27: error: sys/soundcard.h: No such file or directory

因為sys/soundcard.h指的是/cygwin/usr/include下的header檔，所以我們要回到Makefile.minimal中的INCLUDE，將該路徑告訴compiler (紅體字)：

INCLUDE = -I./include -I/android-ndk-r4b/build/platforms/android-8/arch-arm/usr/include -I/usr/include

修改完之後再重新make。


《Step 5》
成功，在SDL的根目錄下產生libSDL.a